Suppliers
Purchasing Terms & Conditions
Purchasing Terms & Conditions
These terms apply to all goods and services purchased by TRS International Mfg., Inc. under a TRS purchase order. Suppliers are responsible for flowing applicable requirements down through their own supply chain.
These terms apply to all goods and services purchased by TRS International Mfg., Inc. under a TRS purchase order. Suppliers are responsible for flowing applicable requirements down through their own supply chain.
Last updated: July 31, 2025
Last updated: July 31, 2025
Applies to all TRS purchase orders
Applies to all TRS purchase orders
1
1
Supplier Quality Control & Product Confirmation
Supplier Quality Control & Product Confirmation
1.1 Supplier quality control
1.1 Supplier Quality Control
Supplier shall establish and maintain a Quality System acceptable to TRS for the goods and/or services purchased under this purchase order. As a minimum, the supplier’s Quality System must meet the requirements of ISO 9001 or better.
Supplier shall establish and maintain a Quality System acceptable to TRS for the goods and/or services purchased under this purchase order. As a minimum, the supplier’s Quality System must meet the requirements of ISO 9001 or better.
1.2.1 Confirmation of supplied products
1.2.1 Confirmation of supplied products
Buyer shall provide written confirmation to Seller once the relevant technical documents (such as product drawings, specifications, process requirements, and work instructions) are finalized. Seller shall deliver conforming products according to Buyer’s purchase orders. No changes to product specifications or quality requirements are accepted unless authorized in writing by Buyer’s purchasing personnel.
Buyer shall provide written confirmation to Seller once the relevant technical documents (such as product drawings, specifications, process requirements, and work instructions) are finalized. Seller shall deliver conforming products according to Buyer’s purchase orders. No changes to product specifications or quality requirements are accepted unless authorized in writing by Buyer’s purchasing personnel.
1.2.2 Absence of specifications
1.2.2 Absence of specifications
In the absence of clear or specific specifications from Buyer, relevant industry standards shall be followed. Where multiple levels or versions of standards exist, Seller is responsible for informing Buyer and obtaining confirmation of the applicable version.
In the absence of clear or specific specifications from Buyer, relevant industry standards shall be followed. Where multiple levels or versions of standards exist, Seller is responsible for informing Buyer and obtaining confirmation of the applicable version.
1.2.3 Inquiries
1.2.3 Inquiries
All inquiries from Seller regarding the purchase order shall be directed to Buyer’s purchasing contact.
All inquiries from Seller regarding the purchase order shall be directed to Buyer’s purchasing contact.
2
2
Packaging and Storage / Transportation Requirements
Packaging and Storage / Transportation Requirements
2.1 Cleanliness
2.1 Cleanliness
Products must be clean and meet required cleanliness standards. Contamination must be prevented, detected, and removed. Agreed packaging methods and storage/transportation containers must be used to avoid collision, damage, or degradation during storage and shipping.
Products must be clean and meet required cleanliness standards. Contamination must be prevented, detected, and removed. Agreed packaging methods and storage/transportation containers must be used to avoid collision, damage, or degradation during storage and shipping.
2.2 ESD protection
2.2 ESD protection
Electrostatic-sensitive devices and components must be labeled and packaged in accordance with ANSI/ESD S20.20 electrostatic discharge protection standards.
Electrostatic-sensitive devices and components must be labeled and packaged in accordance with ANSI/ESD S20.20 electrostatic discharge protection standards.
2.3 FOD prevention
2.3 FOD prevention
For aerospace-related parts, Seller shall implement a Foreign Object Debris (FOD) prevention program.
For aerospace-related parts, Seller shall implement a Foreign Object Debris (FOD) prevention program.
3
3
Delivery Condition Requirements
Delivery Condition Requirements
3.1 Process consistency
3.1 Process consistency
Delivery batches must be produced under the same process conditions (including processing methods, procedures, and equipment) as the approved sample.
Delivery batches must be produced under the same process conditions (including processing methods, procedures, and equipment) as the approved sample.
3.2 Production records
3.2 Production records
Delivery batches must include original production records stating product name, model, revision, lot number, quantity, inspection quantity, inspection data, and results. These records must be available for audit or inspection by Buyer when necessary.
Delivery batches must include original production records stating product name, model, revision, lot number, quantity, inspection quantity, inspection data, and results. These records must be available for audit or inspection by Buyer when necessary.
3.3 Calibration batches
3.3 Calibration batches
Calibration batches must have records proving all product functions are compliant. The outer packaging must clearly indicate that the product is approved for release.
Calibration batches must have records proving all product functions are compliant. The outer packaging must clearly indicate that the product is approved for release.
3.4 Shelf life
3.4 Shelf life
The supplier provides the manufacturing date, shelf life, and expiration date for all limited shelf life items under this order. All items will have 75% or more of their shelf life remaining at the time of shipment to TRS. All items are packaged, labeled, and transported per their applicable regulatory requirements.
The supplier provides the manufacturing date, shelf life, and expiration date for all limited shelf life items under this order. All items will have 75% or more of their shelf life remaining at the time of shipment to TRS. All items are packaged, labeled, and transported per their applicable regulatory requirements.
4
4
Buyer’s Process Control Requirements for Seller
Buyer’s Process Control Requirements for Seller
4.1 Quality assurance system
4.1 Quality assurance system
Seller shall establish a quality assurance system in accordance with AS9100 or an internationally recognized quality standard. Seller must ensure successful audits and recertifications as scheduled and remain listed as an approved supplier by a third-party certification body. Buyer reserves the right to conduct quality audits at Seller’s facility.
Seller shall establish a quality assurance system in accordance with AS9100 or an internationally recognized quality standard. Seller must ensure successful audits and recertifications as scheduled and remain listed as an approved supplier by a third-party certification body. Buyer reserves the right to conduct quality audits at Seller’s facility.
4.2 Supplier rating
4.2 Supplier rating
Buyer maintains a supplier rating system to monitor Seller’s performance in terms of contracts, specifications, and product quality. Any non-compliance will affect Seller’s rating and approval status. Seller is required to implement and complete corrective actions within specified timeframes.
Buyer maintains a supplier rating system to monitor Seller’s performance in terms of contracts, specifications, and product quality. Any non-compliance will affect Seller’s rating and approval status. Seller is required to implement and complete corrective actions within specified timeframes.
5
5
Warranty
Warranty
Warranty period
Warranty period
Seller shall be responsible for product quality within the warranty period. The warranty period must not be shorter than the applicable industry standards or legal/regulatory requirements. For chemicals, life-limited items, or products with shelf life, the remaining service life upon receipt by Buyer must be at least 75% of the designed life, consistent with Section 3.4.
Seller shall be responsible for product quality within the warranty period. The warranty period must not be shorter than the applicable industry standards or legal/regulatory requirements. For chemicals, life-limited items, or products with shelf life, the remaining service life upon receipt by Buyer must be at least 75% of the designed life, consistent with Section 3.4.
6
6
Product Inspection
Product Inspection
6.1 Self-inspection
6.1 Self-inspection
For in-house manufactured products, Seller’s quality personnel must conduct self-inspection in accordance with approved processes and inspection procedures. Electrical functionality must undergo 100% testing. Sampling is not allowed. For defined product characteristics, process inspection must also be 100%.
For in-house manufactured products, Seller’s quality personnel must conduct self-inspection in accordance with approved processes and inspection procedures. Electrical functionality must undergo 100% testing. Sampling is not allowed. For defined product characteristics, process inspection must also be 100%.
6.2 Incoming inspection
6.2 Incoming inspection
Buyer’s Quality Department will conduct incoming inspections and sample approval tests based on standard procedures.
Buyer’s Quality Department will conduct incoming inspections and sample approval tests based on standard procedures.
6.3 Measurement equipment control
6.3 Measurement equipment control
If Seller uses any dedicated measuring instruments, their use must be documented and calibration maintained to ensure measurements are within tolerance. All external calibration services used must comply with ISO/IEC 17025 and be traceable to national standards.
If Seller uses any dedicated measuring instruments, their use must be documented and calibration maintained to ensure measurements are within tolerance. All external calibration services used must comply with ISO/IEC 17025 and be traceable to national standards.
6.4 Sampling plans
6.4 Sampling plans
If sampling inspection is used for acceptance, the plan must be statistically valid and suitable for the product’s criticality and process capability. Sampling plans must be submitted for approval upon request.
If sampling inspection is used for acceptance, the plan must be statistically valid and suitable for the product’s criticality and process capability. Sampling plans must be submitted for approval upon request.
6.5 Acceptance criteria priority
6.5 Acceptance criteria priority
Acceptance criteria shall follow the priority: (1) Buyer’s approved specifications or inspection instructions, (2) Buyer’s internal standards, (3) industry standards.
Acceptance criteria shall follow the priority: (1) Buyer’s approved specifications or inspection instructions, (2) Buyer’s internal standards, (3) industry standards.
6.6 Acceptance standard
6.6 Acceptance standard
Zero Defect.
Zero Defect.
6.7 Sample submission
6.7 Sample submission
For in-house manufactured samples, Seller shall confirm special requirements, key items, and critical characteristics during submission.
For in-house manufactured samples, Seller shall confirm special requirements, key items, and critical characteristics during submission.
7
7
Counterfeit Part Control
Counterfeit Part Control
7.1 Prevention program
7.1 Prevention program
Seller shall establish a counterfeit parts prevention program, conduct risk assessments on materials received, and ensure no counterfeit or suspect parts are delivered or used in products for Buyer. Material grades must not be lower than those approved in sample submissions.
Seller shall establish a counterfeit parts prevention program, conduct risk assessments on materials received, and ensure no counterfeit or suspect parts are delivered or used in products for Buyer. Material grades must not be lower than those approved in sample submissions.
7.2 Traceability
7.2 Traceability
Seller must implement warehouse management to ensure batch control, FIFO, and clear labeling. For aerospace projects, material traceability is required, and a Certificate of Conformance (COC) must be provided with each shipment.
Seller must implement warehouse management to ensure batch control, FIFO, and clear labeling. For aerospace projects, material traceability is required, and a Certificate of Conformance (COC) must be provided with each shipment.
7.3 Approved sources
7.3 Approved sources
Seller must only procure parts from original component manufacturers (OCMs), their authorized distributors, or authorized aftermarket manufacturers. Any alternative sourcing must be pre-approved in writing by Buyer with justification (such as obsolescence, cost, or lead time), including verification methods.
Seller must only procure parts from original component manufacturers (OCMs), their authorized distributors, or authorized aftermarket manufacturers. Any alternative sourcing must be pre-approved in writing by Buyer with justification (such as obsolescence, cost, or lead time), including verification methods.
7.4 Notification
7.4 Notification
If Seller becomes aware of or suspects counterfeit parts have been delivered, Seller shall immediately notify Buyer and propose alternate solutions to avoid supply disruption. All losses and replacement costs related to counterfeit parts shall be borne by Seller.
If Seller becomes aware of or suspects counterfeit parts have been delivered, Seller shall immediately notify Buyer and propose alternate solutions to avoid supply disruption. All losses and replacement costs related to counterfeit parts shall be borne by Seller.
8
8
Production Services
Production Services
8.1 Technical requirements
8.1 Technical requirements
For in-house manufactured products, Seller shall follow Buyer’s technical and process requirements, maintain complete production records, and ensure all product information is traceable.
For in-house manufactured products, Seller shall follow Buyer’s technical and process requirements, maintain complete production records, and ensure all product information is traceable.
8.2 Qualified personnel
8.2 Qualified personnel
Seller shall assign trained and qualified personnel for production and conduct periodic evaluations to confirm competency.
Seller shall assign trained and qualified personnel for production and conduct periodic evaluations to confirm competency.
8.3 Equipment management
8.3 Equipment management
Seller shall implement production equipment management and perform regular maintenance.
Seller shall implement production equipment management and perform regular maintenance.
8.4 Records retention
8.4 Records retention
Quality records shall be retained for at least 15 years from order payment date and remain legible, identifiable, and retrievable. Storage and disposal shall follow Seller’s policies.
Quality records shall be retained for at least 15 years from order payment date and remain legible, identifiable, and retrievable. Storage and disposal shall follow Seller’s policies.
8.5 Change notification
8.5 Change notification
Seller shall notify Buyer of any changes to product/process, suppliers, or production site, and obtain approval when required. Nonconforming processes, products, or services must be disclosed to Buyer, and no rework may be performed without approval.
Seller shall notify Buyer of any changes to product/process, suppliers, or production site, and obtain approval when required. Nonconforming processes, products, or services must be disclosed to Buyer, and no rework may be performed without approval.
8.6 Flow-down
8.6 Flow-down
Seller shall use approved sources and flow down customer and regulatory requirements throughout the supply chain.
Seller shall use approved sources and flow down customer and regulatory requirements throughout the supply chain.
8.7 Evidence of conformity
8.7 Evidence of conformity
Upon request, Seller shall provide evidence of product conformity to Buyer’s customer.
Upon request, Seller shall provide evidence of product conformity to Buyer’s customer.
8.8 Test samples
8.8 Test samples
Upon request, Seller shall provide test samples for design approval, inspection/verification, investigation, or audit purposes.
Upon request, Seller shall provide test samples for design approval, inspection/verification, investigation, or audit purposes.
8.9 Right of access
8.9 Right of access
Buyer, its customers, and regulatory authorities shall have access to applicable areas and records at any level of the supply chain.
Buyer, its customers, and regulatory authorities shall have access to applicable areas and records at any level of the supply chain.
8.10 Noncompliance
8.10 Noncompliance
Seller shall take necessary actions to address any noncompliance with requirements.
Seller shall take necessary actions to address any noncompliance with requirements.
8.11 Employee awareness
8.11 Employee awareness
Seller shall ensure all employees are aware of their contribution to product and service conformity, their contribution to product safety, and the importance of ethical behavior.
Seller shall ensure all employees are aware of their contribution to product and service conformity, their contribution to product safety, and the importance of ethical behavior.
9
9
Nonconforming Product Handling
Nonconforming Product Handling
9.1 During production
9.1 During production
Excluding approved deviations: scrapped items shall be disposed of at Seller’s cost; rework costs shall be borne by Seller; and any losses incurred by Buyer due to nonconformities shall be compensated by Seller. In the case of process nonconformity, Seller must correct the nonconforming process, assess the impact on product quality, determine whether it is an isolated issue, and identify and control affected nonconforming product.
Excluding approved deviations: scrapped items shall be disposed of at Seller’s cost; rework costs shall be borne by Seller; and any losses incurred by Buyer due to nonconformities shall be compensated by Seller. In the case of process nonconformity, Seller must correct the nonconforming process, assess the impact on product quality, determine whether it is an isolated issue, and identify and control affected nonconforming product.
9.2 Outbound products
9.2 Outbound products
Seller must notify Buyer of any nonconforming product and await disposition approval. If Buyer incurs penalties from its customers due to Seller’s responsibility, Seller shall compensate all losses, including materials, rework labor, travel, and other associated costs.
Seller must notify Buyer of any nonconforming product and await disposition approval. If Buyer incurs penalties from its customers due to Seller’s responsibility, Seller shall compensate all losses, including materials, rework labor, travel, and other associated costs.
9.3 Containment
9.3 Containment
Seller shall control the impact of nonconforming product on other processes or products.
Seller shall control the impact of nonconforming product on other processes or products.
9.4 Aerospace scrap
9.4 Aerospace scrap
Scrapped aerospace parts must be permanently marked or physically rendered unusable. If necessary, Seller shall work with Buyer to ensure similar products are unaffected.
Scrapped aerospace parts must be permanently marked or physically rendered unusable. If necessary, Seller shall work with Buyer to ensure similar products are unaffected.
9.5 Release
9.5 Release
No product shall be released or delivered until all planned arrangements are satisfactorily completed unless approved by authorized personnel from Buyer.
No product shall be released or delivered until all planned arrangements are satisfactorily completed unless approved by authorized personnel from Buyer.
Questions about these terms?
Questions about these terms?
Contact TRS International Mfg., Inc. at 27152 Burbank, Foothill Ranch, CA 92610, U.S.A. Tel. (949) 855-0673 · Fax (949) 588-7885
Contact TRS International Mfg., Inc. at 27152 Burbank, Foothill Ranch, CA 92610, U.S.A. Tel. (949) 855-0673 · Fax (949) 588-7885
